63 (2) 8920-7305 up to 7309

Equipment Rentals

All rental machines available.

Showing all 6 results

  • Dingli 1212 HD

    Dingli JCPT 1212HD

    Lifting/Drive Motor

    24V/4.5kW
    Working Height 12.00m
    Overall Length 2.48m
    Overall Width 1.15m
    Tyre Ф381×127mm

    Size

    Model JCPT1212HD  
    Working Height 12.00m  
    Platform Floor Height 10.00m  
    Overall Length 2.48m  
    Overall Width 1.15m  
    Overall Height(Rails up) 2.45m  
    Overall Height(Rails down) 1.91m  
    Platform Size(Length/Width) 2.27mX1.12m  
    Platform Extension Size 0.90m  
    Ground Clearance(Stowed) 0.10m  
    Ground Clearance(Raised) 0.019m  
    Wheel Base 1.87m  

     

    Performance

    S.W.L 320kg  
    S.W.L On Extension 113kg  
    Maximum Workers Number 2  
    Turning Radius(Inside) 0m  
    Turning Radius(Outside) 2.20m  
    Travel Speed(Stowed) 3.5km/h  
    Travel Speed(Raised) 0.8km/h  
    Up/Down Speed 45/36sec  
    Gradeability 25%  
    Maximum Working Slope(CE/ANSI) 1.5°/3°，2°/3°  
    Tyre Ф381×127mm  

    Power

    Lifting/Drive Motor 24V/4.5kW
    Betteries 4×6V/240Ah
    Integrated Charger 24V/25A

    Weight

    Weight(CE) 2945kg
    Weight(ANSI) 2510kg
  • Dingli1412hd

    Dingli JCPT 1412HD

    Lifting/Drive Motor

    24V/4.5kW
    Working Height 13.80m
    Overall Length 2.48m
    Overall Width 1.19m
    Tyre Ф381×127mm

    Size

    Model JCPT1412HD
    Working Height 13.80m
    Platform Floor Height 11.80m
    Overall Length 2.48m
    Overall Width 1.19m
    Overall Height(Rails up) 2.62m
    Overall Height(Rails down) 2.09m
    Platform Size(Length/Width) 2.27m×1.12m
    Platform Extension Size 0.90m
    Ground Clearance(Stowed) 0.10m
    Ground Clearance(Raised) 0.019m
    Wheel Base 1.87m

    Performance

    S.W.L（CE/ANSI） 320kg/250kg
    S.W.L On Extension 113kg
    Maximum Workers Number 3
    Turning Radius(Inside) 0m
    Turning Radius(Outside) 2.20m
    Travel Speed(Stowed) 3.5km/h
    Travel Speed(Raised) 0.8km/h
    Up/Down Speed 65/38sec
    Gradeability 25%
    Maximum Working Slope（CE/ANSI） 1.5°/3°，2°/3°
    Tyre Ф381×127mm

    Power

    Lifting/Drive Motor 24V/4.5kW
    Betteries 4×12V/300Ah
    Integrated Charger 24V/25A

    Weight

    Weight（CE） 2840kg
    Weight（ANSI） 3060kg

     

  • Gehl r190 skid steer loader

    Gehl R190

    Engine Model

    Yanmar – Tier IV/Stage 3B
    Travel speed 7.5 mph
    Operating Weight 6,880 lbs
    Gross Power @ 2500 rpm 69.3 hp
    Overall Operating Height 158″

    Dimensions

    Overall Operating Height – Fully Raised 158″
    Height to Hinge Pin – Fully Raised 120.5″
    Overall Height to Top of ROPS 80″
    Ground Clearance to Chassis 6.5″
    Overall Length with Bucket 127″ with 66″ Bucket
    Overall Length without Bucket 94″
    Wheelbase 42″
    Dump Reach – Fully Raised 22.5″
    Rollback at Ground 26°
    Dump Angle 42°
    Overall Width 66.5″/64.5″A
    Bucket Width 66″
    Clearance Circle – Rear 58.5″
    Clearance Circle – Front without Bucket 44.5″
    Clearance Circle – Front with Bucket 79″
    Seat to Ground Height 39″
    Rollback at Specified Height 96°
    Dump Height 91″
    Departure Angle 25°
    Standard Specification Tire Size 10.00 x 16.5 HD

    Engine

    Make Yanmar
    Model 4TNV98C-NMS Tier IV/Stage 3B
    Gross Power @ 2500 rpm 69.3 hp
    Net Power @ 2500 rpm 68.4 hp
    Maximum Torque 173 ft.-lbs @ 1625
    Displacement 202.6 cu.in.

    Hydraulic System

    Auxiliary Hydraulics – Standard 18.5 gpm
    High-Flow Auxiliary Hydraulics – Option (L/min) 31.5 gpm
    Reservoir Capacity (L) 8 gal.

    Electrical System

    Battery 12-volt
    Starter 12-volt
    Alternator 95-amp

     

    Electrical System

    Rated Operating CapacityB 1,900 lbs. 
    Rated Operating Capacity with Optional CounterweightB 2,110 lbs. 
    Fuel Tank 16.5 gal.
    Travel Speed – Maximum 7.5 mph
    Travel Speed with Two-Speed Option – Maximum 12.5 mph
    Operating WeightC – Approximate 6,880 lbs. 

     

    Highlights:

    • The Gehl R190 Skid Steer Loader has a spacious operator station with plenty of adjustabilities and enhanced comfort features that users have come to expect from Gehl.
    • It also has amped-up hydraulic systems that incorporate intuitive design for precise controllability. 
    • Gehl R190 has taken performance to the next level of Skid Loaders.
  • gehl-r220

    Gehl R220

    Engine     Model

    Yanmar – NMS Tier IV/Stage 3B
    Travel speed 8.0 mph
    Operating Weight 7,980 lbs.
    Gross Power @ 2500 rpm 72 hp
    Overall Operating Height – Fully Raised 161″

    Dimensions

    Overall Operating Height – Fully Raised 161″
    Height to Hinge Pin – Fully Raised 123″
    Overall Height to Top of ROPS 81″
    Ground Clearance to Chassis 8″
    Overall Length with Bucket 136.5″ with 70″ Bucket
    Overall Length without Bucket 105″
    Wheelbase 43″
    Dump Reach – Fully Raised 27″
    Rollback at Ground 28°
    Dump Angle 40°
    Overall Width 69.5″/65.5″A
    Bucket Width 70″
    Clearance Circle – Rear 60″
    Clearance Circle – Front without Bucket 52″
    Clearance Circle – Front with Bucket 87.5″
    Seat to Ground Height 40″
    Rollback at Specified Height 95°
    Dump Height 94″
    Departure Angle 25°
    Standard Specification Tire Size 12.00 x 16.5 HD

    Engine

    Make Yanmar
    Model 4TNV98CT-NMS Tier IV/Stage 3B
    Gross Power @ 2500 rpm 72 hp
    Net Power @ 2500 rpm 70.7 hp
    Maximum Torque @ rpm 217 ft.-lbs. @ 1625
    Displacement 202.6 cu.in.

    Hydraulic System

    Auxiliary Hydraulics – Standard 23.5 gpm
    High-Flow Auxiliary Hydraulics – Option  35 gpm
    Reservoir Capacity  8 gal.

    Electrical System

    Battery 12-volt
    Starter 12-volt
    Alternator 95-amp

    Capacities/Weights

    Rated Operating CapacityB 2,200 lbs.
    Rated Operating Capacity with Optional CounterweightB 2,370 lbs.
    Fuel Tank 18 gal.
    Travel Speed – Maximum 8.0 mph
    Travel Speed with Two-Speed Option – Maximum 11.9 mph
    Operating WeightC – Approximate 7,980 lbs.

    A – Narrow width with off-set wheel option

    B – Per SAE J818, SAE J732, and ISO 14397

    C – Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.

    Highlights:

    • The new R220 has a spacious operator station with plenty of adjustability and enhanced comfort features that users have come to expect from Gehl.
    • The R220 has amped-up hydraulic systems which incorporate intuitive design for precise controllability.
    • The R220 is built with a robust, radial lift arm that incorporates performance and durability.
  • View Details

    MT-X 625

    Lifting height 5.85 m 19’2″
    Lifting capacity 2500 kg 5500 lb
    Weight (unladen) 4710 kg 10362 lb
    Engine Kubota 3A
    Power 55.4kW 75 hp

    Performances

    Lifting height 5.85 m 19’2″
    Lifting capacity 2500 kg 5500 lb
    Drawbar pull 3550 dan 7980 lbf
    Breakout force 3427 dan 7704 lbf
    Moving speed 25 kmh 15.5 mph
    Lifting time (unladen) 8 s
    Lowering time (unladen) 5.4 s
    Boom extension time (unladen) 5.6 s
    Boom retraction time (unladen) 4.3 s
    Crowd 3.5 s
    Dump 3.6 s

    Dimensions

    Length (up to the back of the fork) 3.89 m 12’9″
    Width 1.81 m 5’11”
    Height 1.92 m 6’4″
    Weight (unladen) 4710 kg 10362 lb
    Turning radius 3.31 m 10’10”
    Ground clearance 0.33 m 1’1″

    Engine / Battery

    Energy Diesel
    Engine brand Kubota
    Engine type 3A
    Power 75 cv 75 hp
    Power 55.4 KW
    Max. Torque @ Rotation 265 Nm @ tr/min
    Number of cylinders 4
    Total capacity 3331 cm3
    Injection Direct
    Cooling Water
    Transmission type Hydrostatic

    Hydraulic

    Flow 88 l/min
    Pressure 235 bars
    Hydraulic oil tank volume 115 l 30.37 gal

    Other specifications

    Driving type Seated
    Number of wheels 4
    Number of wheels (front) 2
    Number of wheels (rear) 2
    Number of drive wheels (front) 2
    Number of drive wheels (rear) 2
    Tyre dimensions (front) 12-16.5 12PR SKS CL TUBELESS
    Tyre dimensions (rear) 12-16.5 12PR SKS CL TUBELESS
    Driving position noise levels 75 dB
    Environmental noise levels 104 dB
    Vibrations affecting hands/arms <2.5 m/s
  • MT-X 1030 ST

    MT-X 1030 ST

    Lifting height 9.64 m 31’7″
    Lifting capacity 3000 kg 6600 lb
    Weight (unladen) 7525 kg 16555 lb
    Engine Perkins  3A
    Power 77 KW 101 hp

    Performances

    Lifting height 9.64 m 31’7″
    Lifting capacity 3000 kg 6600 lb
    Drawbar pull 9100 dan 20457 lbf
    Breakout force 5330 dan 11982 lbf
    Moving speed 27 kmh 16.7 mph
    Lifting time (unladen) 6.7 s
    Lowering time (unladen) 5.4 s
    Boom extension time (unladen) 13.6 s
    Boom retraction time (unladen) 8.7 s
    Crowd 2.7 s
    Dump 2.3 s

    Dimensions

    Length (up to the back of the fork) 4.99 m 16’4″
    Wheelbase length 2.69 m 8’10”
    Width 2.26 m 7’5″
    Height 2.3 m 7’6″
    Weight (unladen) 7525 kg 16555 lb
    Turning radius 3.75 m 12’4″
    Ground clearance 0.44 m 1’5″

    Engine / Battery

    Energy Diesel
    Engine brand Perkins
    Engine type 3A
    Engine manufacturer type 1104D-44 TA
    Power 101 cv 101 hp
    Power 77 KW
    Max. Torque @ Rotation 410 Nm @ 1400 tr/min
    Total capacity 4400 cm3
    Injection Direct
    Cooling Water
    Transmission type Torque converter

    Hydraulic

    Flow 106 l/min
    Pressure 250 bars
    Hydraulic oil tank volume 128 l 33.8 gal

    Other specifications

    Driving type Seated
    Standard tyres Pneumatic
    Number of wheels 4
    Number of wheels (front) 2
    Number of wheels (rear) 2
    Number of drive wheels (front) 2
    Number of drive wheels (rear) 2
    Tyre dimensions (front) 400/80-24
    Tyre dimensions (rear) 400/80-24
    Driving position noise levels 76 dB
    Environmental noise levels 104 dB
    Vibrations affecting hands/arms <2.5 m/s