63 (2) 8920-7307 up to 7309, 0917 841-7309
gehl r105

Gehl R105

The R105 is built for efficiency. Has a large operator’s compartment with clear front, side and rear sight lines provides operators full, expansive views for increased safety.

Categories: ,

Product Description

Engine Model

Yanmar -Tier IV
Travel speed 5.9 mph
Operating Weight 4,000 lbs.
Gross Power @ 2500 rpm 34.7 hp
Rated Operating Capacity  1,050 lbs.

Dimensions

Overall Operating Height – Fully Raised 139.6″
Height to Hinge Pin – Fully Raised 107.5″
Overall Height to Top of ROPS 70.3″
Overall Length with Bucket  114″
Dump Angle at Full Height 42° 
Dump Height 84.5″
Dump Reach at Full Height  22.8″
Rollback at Ground 29°
Rollback Angle at Full Height 99°
Seat to Ground Height 32.6″
Wheelbase 34.5″
Overall Width – Less Bucket A  48.4″
Bucket Width 55″
Ground Clearance to Chassis 6.0″
Overall Length – Less Bucket 88.9″
Departure Angle 26°
Clearance Circle – Front w/ Bucket 69.4″
Clearance Circle – Front w/o Bucket 44.1″
Clearance Circle – Rear 54.1″
Standard Specification Tire Size 27×8.5×15 HD

Engine

Make Yanmar
Model 3TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 34.7 hp
Net Power @ 2500 rpm 33.1 hp
Maximum Torque 80.7 ft.-lbs. @ 1820
Displacement 100 cu.in.

Hydraulic System

Auxiliary Hydraulics – Standard 14.5 gpm
High-Flow Auxiliary Hydraulics – Option  N/A
Reservoir Capacity 8 gal.

Electrical System

Battery 12-volt
Starter 12-volt
Alternator 40-amp

Electrical System

Rated Operating CapacityB 1,050 lbs.
Rated Operating Capacity with Optional CounterweightB 1,175 lbs.
Fuel Tank 10.4 gal.
Travel Speed – Maximum 5.9 mph
Travel Speed with Two-Speed Option – Maximum N/A
Operating WeightC – Approximate 4,000 lbs.

 

A – Overall width is dependent upon the amount of wheel offset.

B – Per SAE J818, SAE J732, and ISO 14397

C – Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.

 

Highlights:

  • A full line of Edge attachments and accessories are designed specifically to fill operators’ needs, making their R105 the most versatile machine on the job site.
  • The R105 provides 14.5 gpm (55) of hydraulic flow powering a variety of attachments to get work done faster.
  • Ergonomic controls in the R105 Skid Loader provide smooth loader and attachment operation.