Private: Shop

Showing 19–27 of 187 results

• 

  C202

  Engine     Model	R754 E6c (60D/14)
  Maximum speed	Up to 40 km/h
  Brush diameter	850 mm
  Brush speed	Up to 125 rev./min
  Total water systems	402 litres

  Engine

  Model	R754 E6c (60D/14)
  Cubic capacity	2.970 litres
  No. of cylinders	4
  Gross rated power	62 kW (83 bhp) @ 2300 rev./min.
  Maximum torque	270 Nm (199 Ib.ft.) @ 1350 rev./min.
  Legislation compliance	Regulation (EC) No 595/2009

  Performance

  Tare Weight	2850 kg (E6c & S5)
  GVM – Standard machine	3500 kg.
  Payload	650 kg.
  Maximum speed	Up to 40 km/h
  Sweeping speed	0 to 16 km/h
  Sweep rate/output	36,800 m2/hr
  Gradeability	Up to 30%
  Sweeping operational rpm	1000 – 1480 rpm
  Transit operational rpm	Up to 2250 rpm

  Sweeping Equipment

  Brush diameter	850 mm
  Brush speed	up to 125 rev./min
  Nozzle width	815 mm
  Sweep rate/output	1545 mm

  Capacities

  Hopper voided volume	1.8 m3, 1.4003 stainless steel hopper
  Fuel tank	52 litres
  Clean water tank	152 litres
  Recirculation system	250 litres
  Total water systems	402 litres

• 

  C401

  Engine     Model	FPT (Iveco) NEF 45 ENT VI
  Maximum speed	Up to 50 km/h
  Brush diameter	1000 mm
  Brush speed	Up to 125 rev./min
  Lost water tank	825 litres

  Engine

  Model	FPT (Iveco) NEF 45 ENT VI
  Cubic capacity	4.5 litres
  No. of cylinders	4
  Gross rated power	118 kW (158 bhp) @ 2500 rev./min.
  Maximum torque	580 Nm (428 lb.ft.) @ 1250-1940 rev./min.
  Legislation compliance	Regulation (EC) No 595/2009	Regulation (EU) No 582/2011

  Performance

  Tare Weight	5500 kg.
  GVM – Standard machine	10,500 kg
  Payload	5000 kg.
  Maximum speed	Up to 50 km/h
  Sweeping speed	0 to 16 km/h
  Hopper discharge angle	50o
  Gradeability	22% @ GVM 10,500 kg
  Sweeping operational rpm	1100 – 1800 rpm
  Transit operational rpm	Up to 2200 rpm

  Sweeping Equipment

  Brush diameter	1000 mm
  Brush speed	up to 125 rev./min
  Nozzle width	850 mm
  Sweep rate/output	42,400 m2/h
  Hopper discharge height	940 mm
  Hopper discharge height	High dump up to 1550 mm

• 

  C201

  Engine    Model	R754 E6
  Maximum speed	Up to 40 km/h
  Brush diameter	850 mm
  Brush speed	Up to 125 rev./min
  Total water system	402 litres

  Engine

  Model	R754 E6 (60D/14)	common rail direct injection turbocharged and intercooled diesel engine
  Cubic capacity	2.970 litres
  No. of cylinders	4
  Gross rated power	62 kW (83 bhp) @ 2300 rev./min
  Maximum torque	270 Nm (199 Ib.ft.) @ 1350 rev./min.
  Legislation compliance	Regulation (EC) No 595/2009	Regulation (EU) No 582/2011

  Performance

  Tare Weight	2800 kg
  GVM – Standard machine	3500 kg
  Payload	1200 kg.
  Maximum speed	Up to 40 km/h
  Sweeping speed	0 to 16 km/h
  Sweep rate/output	36,800 m2/hr
  Gradeability forwards	Up to 30%
  Sweeping operational rpm	1000 – 1480 rpm
  Transit operational rpm	Up to 2250 rpm

  Sweeping Equipment

  Brush diameter	850 mm
  Brush speed	up to 125 rev./min
  Nozzle width	815 mm
  Hopper discharge height	1545 m

• 

  C101

  Engine     Model	Deutz D2011 L03i
  Maximum speed	25 km/h
  Brush diameter	700 mm
  Brush speed	Up to 120 rev./min
  Total water system	320 liters

  Engine

  Model	Deutz D2011 L03i Direct injection, Oil cooling
  Cubic capacity	2.33 litres
  No. of cylinders	3 in line
  Gross rated power	31 kW @ 2300 rev./min.
  Maximum torque	137 Nm @ 1700 rev./min.
  Legislation compliance	Meets EU RL 97/68/EC	Stage 3A; 2004/26/EC

  Performance

  Tare Weight	2000 kg	&nbps;
  GVM – Standard machine	2800 kg	&nbps;
  Payload	800 kg. – Dependant on options	&nbps;
  Maximum speed	25 km/h	&nbps;
  Sweeping rpm	850 – 1900 rpm	&nbps;
  Transit rpm	up to 2300rpm	&nbps;

• 

  TLB 844

   

  Capacity		4.16 l
  Backhoe width		0.892m
  Loader width		2.235m

   

  Performances

  Capacity	4.16 l
  Max. Depth	4.741 m

  Dimensions

  Total length (fork included)	7.338 m
  Width	2.33 m
  Height	3.762 m
  Weight (unladen)	6885 kg
  Machine kerb weight	6985 kg
  Turning radius over tyres (braked / not braked)	7.2 m/8.4 m	23’10” /27’8″
  Turning radius over bucket (braked / not braked)	10 m/11.1 m	32’1″ /36’6″

   

  ---

  Engine / Battery

  Energy	Diesel
  Engine brand	Kirloskar
  Transmission type	b_transmission.Carraro
  Gears forward / Gears reverse	4/4

  ---

  Hydraulic

  Hydraulic oil tank volume	90 l
  Main relief pressure	225 bars	3250 psi

  ---

  Other specifications

  Backhoe standard capacity	0.24 cu m
  Backhoe width	0.892m
  Loader standard capacity	1 cu m
  Loader width	2.235m
  Number of steering wheels /drive wheels	2/

   

• 

  MH 25

  Lifting height	3.3 m	10’10”
  Lifting capacity	2500 kg	5500 lb
  Weight (unladen)	4260 kg	9392 lb
  Moving speed	14 kmh	8.68 mph
  Engine	Kubota	Stage 3A

  Performances

  Lifting height	3.3 m	10’10”
  Lifting capacity	2500 kg	5500 lb
  Drawbar pull	3550 dan	7981 lbf
  Moving speed	14 kmh	8.68 mph
  Mast inclination (front/rear)	( 10 ° / 12 ° )

  Dimensions

  Length (up to the back of the fork)	2.95 m	9’8″
  Total length (fork included)	4.045 m	13’3″
  Wheelbase length	1.8 m	5’11”
  Width	1.45 m	4’9″
  Fork carriage width	1.26 m	4’2″
  Aisle width (with a 1000 x 1200 palette)	5.09 m	16.7
  Aisle width (with a 800 x 1200 palette)	5.29 m	17.35
  Height	2.1 m	6’11”
  Weight (unladen)	4260 kg	9392 lb
  Front axle weight (laden)	5812 kg	12813 lb
  Front axle weight (unladen)	1750 kg	3858 lb
  Rear axle weight (laden)	948 kg	2090 lb
  Rear axle weight (unladen)	2510 kg	5534 lb
  Turning radius	3.265 m	10’8″
  Ground clearance	0.26 m	0’10”

  Engine / Battery

  Energy	Diesel
  Engine brand	Kubota
  Engine type	Stage 3A
  Engine manufacturer type	V2403 M-E3B
  Power	36 KW
  Number of cylinders	4
  Total capacity	2434 cm3	148.5 in3
  Transmission type	Hydrostatic

  Other specifications

  Standard tyres	Pneumatic
  Number of wheels (front/rear)	2/2
  Number of drive wheels (front/rear)	2/2
  Number of steering wheels (front/rear)	0/0
  Tyre dimensions (front)	280/80 R20 XMCL
  Tyre dimensions (rear)	27.10 – 12 IC 30 14PR
  Standard mast type	Duplex
  Free lift (standard mast, lowered)	0.13 m	0’5″
  Standard mast height (when raised)	1.835 m	6’0″
  Standard mast height (when raised)	4.07 m	13’4″
  Driving position noise levels	104 dB

  Hydraulic

  Pressure

  170 bars

• 

  MC-18

  Lifting height	3.3 m	10’10”
  Lifting capacity	1800 kg	3960 lb
  Weight (unladen)	3405 kg	7491 lb
  Moving speed	25 kmh	15.5 mph
  Engine	Kubota	Stage 3B

  Performances

  Lifting height	3.3 m	10’10”
  Lifting capacity	1800 kg	3960 lb
  Drawbar pull	108 dan
  Moving speed	25 kmh	15.5 mph
  Mast inclination (front/rear)	( 10 ° / 12 ° )

  Dimensions

  Length (up to the back of the fork)	2.95 m	9’8″
  Total length (fork included)	4.05 m	13’3″
  Wheelbase length	1.9 m	6’3″
  Width	1.45 m	4’9″
  Fork carriage width	1.26 m	4’2″
  Aisle width (with a 1000 x 1200 palette)	4.4 m	14.44
  Height	2.34 m	7’8″
  Weight (unladen)	3405 kg	7491 lb
  Front axle weight (laden)	4555 kg	10021 lb
  Front axle weight (unladen)	1625 kg	3575 lb
  Rear axle weight (laden)	650 kg	1430 lb
  Rear axle weight (unladen)	1780 kg	3916 lb
  Turning radius	2.58 m	8’6″
  Ground clearance	0.32 m	1’1″

  Engine / Battery

  Energy	Diesel
  Engine brand	Kubota
  Engine type	Stage 3B
  Power	26.5 KW
  Number of cylinders	4
  Total capacity	1498 cm3
  Transmission type	Hydrostatic

   

  Other specifications

  Standard tyres	Pneumatic
  Number of wheels (front/rear)	2/2
  Number of drive wheels (front/rear)	2/0
  Tyre dimensions (front)	12.5/80-18/12
  Tyre dimensions (rear)	7.00-12/12
  Standard mast type	Duplex
  Free lift (standard mast, lowered)	0.09 m	0’3″
  Standard mast height (when raised)	2.34 m	7’8″
  Standard mast height (when raised)	4.18 m	13’8″
  Driving position noise levels	79 dB
  Environmental noise levels	103 dB

• 

  M-X 70-2

  Lifting height	4 m	13’1″
  Lifting capacity	7000 kg	15400 lb
  Weight (unladen)	9810 kg	21582 lb
  Engine	Perkins	3A
  Power	95 ch	70 KW

  Performances

  Lifting height	4 m	13’1″
  Lifting capacity	7000 kg	15400 lb
  Drawbar pull	7960 dan
  Moving speed	24 kmh	14.9 mph
  Mast inclination (front/rear)	( 15 ° / 15 ° )

  Dimensions

  Length (up to the back of the fork)	4.16 m	13’8″
  Wheelbase length	2.49 m	8’2″
  Width	2.15 m	7’1″
  Height	2.44 m	8’0″
  Weight (unladen)	9810 kg	21582 lb
  Turning radius	4.21 m	13’10”
  Ground clearance	0.39 m	1’3″

  Engine / Battery

  Energy	Diesel
  Engine brand	Perkins
  Engine type	3A
  Power	95 ch
  Power	70 KW
  Injection	Direct
  Cooling	Water
  Transmission type	Torque converter

  Hydraulic

  Flow	85 l/min
  Pressure	230 bars

  Other specifications

  Standard tyres	Pneumatic
  Number of wheels (front/rear)	2/2
  Number of drive wheels (front/rear)	2/2
  Tyre dimensions (front)	18R19.5XFTL (445/65R19.5)
  Tyre dimensions (rear)	265/70R19.5HTR1
  Standard mast type	Duplex
  Driving position noise levels	76 dB
  Environmental noise levels	103 dB
  Vibrations affecting hands/arms	2.5 m/s

• 

  M-X 30-2

  Lifting height	3.7 m	12’2″
  Lifting capacity	3000 kg	6600 lb
  Weight (unladen)	5430 kg	11946 lb
  Moving speed	24 kmh	14.9 mph
  Engine	Perkins	Stage 3A

  Performances

  Lifting height	3.7 m	12’2″
  Lifting capacity	3000 kg	6600 lb
  Drawbar pull	4250 dan
  Moving speed	24 kmh	14.9 mph
  Mast inclination (front/rear)	( 6 ° / 12 ° )

  Dimensions

  Length (up to the back of the fork)	3.63 m	11’11”
  Width	2.1 m	6’11”
  Height	2.46 m	8’1″
  Weight (unladen)	5430 kg	11946 lb
  Turning radius	4.1 m	13’5″
  Ground clearance	0.38 m	1’3″

  Engine / Battery

  Energy	Diesel
  Engine brand	Perkins
  Engine type	Stage 3A
  Power	95 ch
  Power	70 KW
  Injection	Direct
  Cooling	Water
  Transmission type	Torque converter

  Hydraulic

  Flow	85 l/min
  Pressure	185 bars

   

  Other specifications

  Standard tyres	Pneumatic
  Number of wheels (front/rear)	2/2
  Number of drive wheels (front/rear)	2/
  Tyre dimensions (front)	440/80 R24
  Tyre dimensions (rear)	10R17.5G291134M
  Standard mast type	Duplex